|Climate zone||Ψυχρή, εύκρατη|
|Τύπος||Curtain Wall System|
Aluminium mullion and transom facade. Covering- and pressure-strip from aluminium. Insulation of polytheylene inside of the rebate. Losses by screws and glass carrier were determined by 3d-thermal flux analysis (PHI). Used Pane: 50 mm (6/16/6/16/6), rebate depth: 14 mm. Used spacer: ULTIMATE Swisspacer. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
|Mullion Fixed||52 mm||0,93 W/(m²K)||0,034 W/(mK)||0,800|
|Transom fixed||52 mm||0,92 W/(m²K)||0,034 W/(mK)||0,800|
|Bottom Fixed||52 mm||0,92 W/(m²K)||0,034 W/(mK)||0,800|
|Top fixed||52 mm||0,92 W/(m²K)||0,034 W/(mK)||0,800|
|Lateral fixed||52 mm||0,93 W/(m²K)||0,034 W/(mK)||0,800|