| Component id: | 1024cw03 |
|---|---|
| Manufacturer: | Kawneer UK Limited |
| Category: | Curtain Wall System |
| Material: | Aluminium |
| UW: | 0.80 W/(m2 K) |
| Efficiency class: | phA+ |
| Spacer: | SWISSPACER V |
| Climate zones: | Cool, temperate |
| Description: | Aluminium mullion and transom facade, cover- and pressure- strip of aluminium. PE-insulator (0.038 W/(mK) inside of the rebate. The losses by the screws habe been determined by measurement, the losses caused by the glass carrier by 3D-simulation (PHI). Used Pane: 54 mm (6/18/6/18/6), intersection of the Glass: 14 mm. Used spacer: Swissspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Certified since: | Dec. 21, 2016 |
| Frame cut | Frame width bf/mm |
Frame U-value Uf/(W/(m2 K)) |
Glass edge Ψ-value Ψg/(W/(m K)) |
Temperature factor fRsi = 0,25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 50 | 0.81 | 0.037 | 0.79 |
| Transom Fixed | 50 | 0.81 | 0.037 | 0.79 |
| Transom 1 casement | 180 | 1.30 | 0.031 | 0.79 |
| Bottom Fixed | 50 | 0.81 | 0.037 | 0.79 |
| Top Fixed | 50 | 0.81 | 0.037 | 0.79 |
| Lateral Fixed | 50 | 0.81 | 0.037 | 0.79 |
