Component Database

English Deutsch polski 简体中文


Curtain wall system
PONZIO PF152HI


Component id: 0623cw03
Manufacturer: PONZIO POLSKA Sp. z o.o.
Category: Curtain Wall System
Material: Aluminium
UW: 0.80 W/(m2 K)
Efficiency class: phA
Spacer: SWISSPACER Ultimate
Climate zones: Cool, temperate
Description: Aluminium mullion and transom facade. Covering- and pressure-strip from aluminium. Insulation of polytheylene inside of the rebate. Losses by screws and glass carrier were determined by 3d-thermal flux analysis (PHI). Used Pane: 50 mm (6/16/6/16/6), rebate depth: 14 mm. Used spacer: ULTIMATE Swisspacer. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
Certified since: May 16, 2014

Frame cut Frame width
bf
mm
Frame U-value
Uf
W/(m2 K)
Glass edge Ψ-value
Ψg
W/(m K)
Temperature factor
fRsi = 0.25 m2K/W
Mullion Fixed 52 0.93 0.034 0.80
Transom Fixed 52 0.92 0.034 0.80
Bottom Fixed 52 0.92 0.034 0.80
Top Fixed 52 0.92 0.034 0.80
Lateral Fixed 52 0.93 0.034 0.80

Coming soon

Back to list

Legal notice | Disclaimer | Privacy Policy