Newly certified Manufacturers Certification criteria

No element found

THERM+ 50 S-I (schräg)

0Products in the comparision list
Compare all

THERM+ 50 S-I (schräg)

Certified since June 1, 2012
Climate zone Cool, temperate
Type Glass Roof
Efficiency Class phA
Material Steel / Aluminium
UW 0.84 W/(m2K)
Open type

Description

Steel construction, with steel system carrier. Covering- and pressure-strip from aluminium. PE-foam insulator in the glazing rebate (0.038 W/(mK)), covered by aluminium foil on the inside. Screw- and Glass carrier losses measured by ift Rosenheim. Used Pane: 48 mm (8/14/4/16/6), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.

Name Frame width U-Value Ψ-Value Frsi-Value
Mullion Fixed 50 mm 0.87 W/(m²K) 0.039 W/(mK) 0.770
Transom fixed 50 mm 0.95 W/(m²K) 0.039 W/(mK) 0.770
Transom 1 casement 94 mm 1.65 W/(m²K) 0.035 W/(mK) 0.770
Bottom Fixed 50 mm 0.95 W/(m²K) 0.038 W/(mK) 0.770
Top fixed 50 mm 0.95 W/(m²K) 0.038 W/(mK) 0.770
Lateral fixed 50 mm 0.87 W/(m²K) 0.039 W/(mK) 0.770
0209ic03
English
Deutsch
Gewerbegebiet Nord 2
87772 Pfaffenhausen
Germany

U-Value Calculation

Please select preferred window layout