Component id: | 0538ic03 |
---|---|
Manufacturer: | JET Brakel Aero GmbH |
Categoría: | Glass Roof |
Material: | Aluminium |
UW: | 0,82 W/(m2 K) |
Efficiency class: | phA |
Spacer: | SWISSPACER V |
Climate zones: | Frío, templado |
Descripción: | Aluminium construction with covering- and pressure-strip from aluminium. PE-foam and styrodur insulator in the glazing rebate. Screws themallly seperated by ABS. Losses by screws and glass carrier were determined by 3D-thermal flux analysis (PHI). Used Pane: 52 mm (6/16/6/16/8), intersection of the Glass: 16 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
Frame cut | Frame width bf/mm |
Frame U value Uf/(W/(m2 K)) |
Glass edge Ψ-value Ψg/(W/(m K)) |
Temperature factor fRsi = 0,25 m2K/W |
---|---|---|---|---|
Mullion Fixed | 60 | 0,98 | 0,040 | 0,81 |
Transom Fixed | 60 | 0,99 | 0,040 | 0,81 |
Bottom Fixed | 60 | 0,99 | 0,039 | 0,81 |
Top Fixed | 60 | 0,99 | 0,039 | 0,81 |
Lateral Fixed | 60 | 0,98 | 0,040 | 0,81 |
Aviso legal Descargo de responsabilidad | Política de privacidad