Component Database

English Deutsch polski 简体中文


Curtain wall system
MB-SR50N HI+


Component id: 0726cw03
Manufacturer: Aluprof S.A.
Catégorie: Curtain Wall System
Material: Aluminium
UW: 0,80 W/(m2 K)
Efficiency class: phA+
Spacer: SWISSPACER Ultimate
Climate zones: Frais, tempéré
Description: Mullion and transom facade of aluminium. Aluminium cover- and pressure- strip. PE foam insulator inside of the rebate (0.035 W/(mK). Used Pane: 54 mm (6/18/6/18/6), intersection of the Glass: 14 mm. The screw-losses were carried out by 3D-thermal flux simulation (PHI), for the glass-carrier losses, the default-values according to the certification criteria were taken into account. Used spacer: ULTIMATE Swisspacer with silicone secondary sealing. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
Certified since: 16 octobre 2014

Frame cut Frame width
bf
mm
Frame U-value
Uf
W/(m2 K)
Glass edge Ψ-value
Ψg
W/(m K)
Temperature factor
fRsi = 0.25 m2K/W
Mullion Fixed 50 0,97 0,032 0,83
Transom Fixed 50 0,94 0,032 0,83
Bottom Fixed 50 0,94 0,032 0,83
Top Fixed 50 0,94 0,032 0,83
Lateral Fixed 50 0,97 0,032 0,83

Coming soon

Back to list

Mentions légales | Clause de non-responsabilité | Politique de confidentialité