Component id: | 0623cw03 |
---|---|
Manufacturer: | PONZIO POLSKA Sp. z o.o. |
Catégorie: | Curtain Wall System |
Material: | Aluminium |
UW: | 0,80 W/(m2 K) |
Efficiency class: | phA |
Spacer: | SWISSPACER Ultimate |
Climate zones: | Frais, tempéré |
Description: | Aluminium mullion and transom facade. Covering- and pressure-strip from aluminium. Insulation of polytheylene inside of the rebate. Losses by screws and glass carrier were determined by 3d-thermal flux analysis (PHI). Used Pane: 50 mm (6/16/6/16/6), rebate depth: 14 mm. Used spacer: ULTIMATE Swisspacer. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
Certified since: | 16 mai 2014 |
Frame cut | Frame width bf mm |
Frame U-value Uf W/(m2 K) |
Glass edge Ψ-value Ψg W/(m K) |
Temperature factor fRsi = 0.25 m2K/W |
---|---|---|---|---|
Mullion Fixed | 52 | 0,93 | 0,034 | 0,80 |
Transom fixed | 52 | 0,92 | 0,034 | 0,80 |
Bottom Fixed | 52 | 0,92 | 0,034 | 0,80 |
Top fixed | 52 | 0,92 | 0,034 | 0,80 |
Lateral fixed | 52 | 0,93 | 0,034 | 0,80 |
Mentions légales | Clause de non-responsabilité | Politique de confidentialité