| Component id: | 1224cw03 |
|---|---|
| Manufacturer: | Hebei Xinhua Curtain Wall Co., Ltd. |
| Categoria: | Curtain Wall System |
| Material: | Aluminium |
| UW: | 0,78 W/(m2 K) |
| Efficiency class: | phA |
| Spacer: | SWISSPACER Ultimate |
| Climate zones: | Freddo, temperato |
| Descrizione: | Aluminium curtain wall. Insulation inside the rebate (0.032) and infront of the pressure plate (0.031). Thermal bridges determined via 3D FEM simulation. Pane thickness: 50 mm (6/16/6/16/6), rebate depth: 27 mm, spacer: SWISSPACER Ultimate. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Frame cut | Frame width bf/mm |
Frame U value Uf/(W/(m2 K)) |
Glass edge Ψ-value Ψg/(W/(m K)) |
Temperature factor fRsi = 0,25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 80 | 0,61 | 0,035 | 0,84 |
| Transom Fixed | 80 | 0,62 | 0,035 | 0,84 |
| Transom 1 casement | 144 | 0,77 | 0,034 | 0,81 |
| Bottom Fixed | 80 | 0,65 | 0,034 | 0,84 |
| Top Fixed | 80 | 0,65 | 0,034 | 0,84 |
| Lateral Fixed | 80 | 0,65 | 0,034 | 0,84 |
Avviso legale | Esclusione di responsabilità | Informativa sulla privacy
