Component id: | 1024cw03 |
---|---|
Manufacturer: | Kawneer UK Limited |
Categoria: | Curtain Wall System |
Material: | Aluminium |
UW: | 0,80 W/(m2 K) |
Efficiency class: | phA+ |
Spacer: | SWISSPACER V |
Climate zones: | Freddo, temperato |
Descrizione: | Aluminium mullion and transom facade, cover- and pressure- strip of aluminium. PE-insulator (0.038 W/(mK) inside of the rebate. The losses by the screws habe been determined by measurement, the losses caused by the glass carrier by 3D-simulation (PHI). Used Pane: 54 mm (6/18/6/18/6), intersection of the Glass: 14 mm. Used spacer: Swissspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
Frame cut | Frame width bf/mm |
Frame U value Uf/(W/(m2 K)) |
Glass edge Ψ-value Ψg/(W/(m K)) |
Temperature factor fRsi = 0,25 m2K/W |
---|---|---|---|---|
Mullion Fixed | 50 | 0,81 | 0,037 | 0,79 |
Transom Fixed | 50 | 0,81 | 0,037 | 0,79 |
Transom 1 casement | 180 | 1,30 | 0,031 | 0,79 |
Bottom Fixed | 50 | 0,81 | 0,037 | 0,79 |
Top Fixed | 50 | 0,81 | 0,037 | 0,79 |
Lateral Fixed | 50 | 0,81 | 0,037 | 0,79 |
Avviso legale | Esclusione di responsabilità | Informativa sulla privacy