PROCURAL PF152HI
Certified since | 16 Maggio 2014 |
Climate zone | Freddo, temperato |
Tipo | Curtain Wall System |
Sub Type | |
Efficiency Class | phA |
Material | Aluminium |
UW | 0,80 W/(m2K) |
Open type |
Descrizione
Aluminium mullion and transom facade. Covering- and pressure-strip from aluminium. Insulation of polytheylene inside of the rebate. Losses by screws and glass carrier were determined by 3d-thermal flux analysis (PHI). Used Pane: 50 mm (6/16/6/16/6), rebate depth: 14 mm. Used spacer: ULTIMATE Swisspacer. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
Nome | Frame width | U-Value | Ψ-Value | Frsi-Value |
---|---|---|---|---|
Mullion Fixed | 52 mm | 0,93 W/(m²K) | 0,034 W/(mK) | 0,800 |
Transom fixed | 52 mm | 0,92 W/(m²K) | 0,034 W/(mK) | 0,800 |
Bottom Fixed | 52 mm | 0,92 W/(m²K) | 0,034 W/(mK) | 0,800 |
Top fixed | 52 mm | 0,92 W/(m²K) | 0,034 W/(mK) | 0,800 |
Lateral fixed | 52 mm | 0,93 W/(m²K) | 0,034 W/(mK) | 0,800 |