| Component id: | 1262cw03 |
|---|---|
| Manufacturer: | Qingdao Honghai curtain wall systems co., ltd |
| Categoria: | Curtain Wall System |
| Material: | Aluminium |
| UW: | 0,78 W/(m2 K) |
| Efficiency class: | phA+ |
| Spacer: | TGI-Spacer Precision |
| Climate zones: | Freddo, temperato |
| Descrizione: | Aluminium - mullion and transom facade, standard values used for screw and (plastic with metal screws) glass carrier. Screw channel and pressure-plate: PVC. Insulation: Kingspan Kooltherm (0,023 W/mK) and XPE foam (0,040 W/mK). Pane thickness: 60 mm (8/18/8/18/8 mm). Rebate depth: 16 mm. Spacer: TGI Precision. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Certified since: | 31 Luglio 2018 |
| Frame cut | Frame width bf mm |
Frame U-value Uf W/(m2 K) |
Glass edge Ψ-value Ψg W/(m K) |
Temperature factor fRsi = 0.25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 60 | 0,79 | 0,031 | 0,80 |
| Transom fixed | 60 | 0,78 | 0,030 | 0,79 |
| Mullion 1 casement | 110 | 0,58 | 0,033 | 0,80 |
| Bottom Fixed | 60 | 0,73 | 0,030 | 0,79 |
| Top fixed | 60 | 0,73 | 0,030 | 0,79 |
| Lateral fixed | 60 | 0,73 | 0,030 | 0,84 |
Avviso legale | Esclusione di responsabilità | Informativa sulla privacy
