| Component id: | 0164cw03 |
|---|---|
| Manufacturer: | RAICO Bautechnik GmbH |
| Categoria: | Curtain Wall System |
| Material: | Timber / Aluminium |
| UW: | 0,80 W/(m2 K) |
| Efficiency class: | phA |
| Spacer: | SWISSPACER V |
| Climate zones: | Freddo, temperato |
| Descrizione: | Timber construction, Aluminium covering- and pressure-strip. PE-foam insulator in the glazing rebate. Plastic glass-carier on stainless steel screws. The losses by the screws werde determined by measurement (ift), the losses caused by the glass carrier by 3D-simulation (PHI). Used Pane: 44 mm (4/16/4/16/4), intersection of the Glass: 12. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Certified since: | 11 Marzo 2010 |
| Frame cut | Frame width bf mm |
Frame U-value Uf W/(m2 K) |
Glass edge Ψ-value Ψg W/(m K) |
Temperature factor fRsi = 0.25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 56 | 0,94 | 0,034 | 0,76 |
| Transom fixed | 56 | 0,93 | 0,035 | 0,76 |
| Bottom Fixed | 56 | 0,93 | 0,035 | 0,76 |
| Top fixed | 56 | 0,93 | 0,035 | 0,76 |
| Lateral fixed | 56 | 0,94 | 0,034 | 0,76 |
Avviso legale | Esclusione di responsabilità | Informativa sulla privacy