1161cw03 Schüco FWS 60.SI: (Curtain wall system): 0M1
1161cw03 Schüco FWS 60.SI: (Curtain wall system): 0M1
1161cw03 Schüco FWS 60.SI: (Curtain wall system): 0T1
1161cw03 Schüco FWS 60.SI: (Curtain wall system): 1T1
1161cw03 Schüco FWS 60.SI: (Curtain wall system): FB1
1161cw03 Schüco FWS 60.SI: (Curtain wall system): FH1
1161cw03 Schüco FWS 60.SI: (Curtain wall system): FJ1
Schüco FWS 60.SI
| Certified since | 25 Gennaio 2018 |
| Climate zone | Freddo, temperato |
| Tipo | Curtain wall system |
| Sub type | |
| Efficiency class | phA |
| Material | Aluminium |
| UW | 0,80 W/(m2K) |
| Open type |
Descrizione
Aluminum curtain wall, insulated by PE-foam (0.038 W/(mK)) and PET-foam (0.035 W/(mK)). Reduction of the radiation losses by low emmissivity tape. Pane thickness: 46 mm (6/16/4/16/4), rebate depth: 18 mm, spacer: SWISSPACER Ultimate. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
| Nome | Frame width | U-value | Ψ-value | Frsi-value |
|---|---|---|---|---|
| Mullion Fixed | 60 mm | 0,84 W/(m²K) | 0,034 W/(mK) | 0,830 |
| Transom fixed | 60 mm | 0,84 W/(m²K) | 0,034 W/(mK) | 0,810 |
| Transom 1 casement | 167 mm | 1,31 W/(m²K) | 0,030 W/(mK) | 0,770 |
| Bottom Fixed | 60 mm | 0,86 W/(m²K) | 0,034 W/(mK) | 0,820 |
| Top fixed | 60 mm | 0,86 W/(m²K) | 0,034 W/(mK) | 0,820 |
| Lateral fixed | 60 mm | 0,81 W/(m²K) | 0,033 W/(mK) | 0,810 |
