Newly certified Manufacturers Certification criteria

No element found

0Products in the comparision list
Compare all

THERM+ 50 A-I (schräg)

Certified since 01 Giugno 2012
Climate zone Freddo, temperato
Tipo Glass Roof
Sub Type
Efficiency Class phA
Material Aluminium
UW 0,85 W/(m2K)
Open type

Descrizione

Aluminium construction, with aluminium system carrier. Covering- and pressure-strip from aluminium. PE-foam insulator in the glazing rebate (0.038 W/(mK)), cover by aluminium foil on the inside. Screw- and Glass carrier losses measured by ift Rosenheim. Used Pane: 48 mm (8/14/4/16/6), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.

Nome Frame width U-Value Ψ-Value Frsi-Value
Mullion Fixed 50 mm 0,95 W/(m²K) 0,041 W/(mK) 0,770
Transom fixed 50 mm 1,05 W/(m²K) 0,041 W/(mK) 0,770
Transom 1 casement 94 mm 1,65 W/(m²K) 0,035 W/(mK) 0,770
Bottom Fixed 50 mm 1,05 W/(m²K) 0,040 W/(mK) 0,770
Top fixed 50 mm 1,05 W/(m²K) 0,040 W/(mK) 0,770
Lateral fixed 50 mm 0,95 W/(m²K) 0,041 W/(mK) 0,770
0208ic03
PHPP 9
PHPP 10
English
Deutsch
Gewerbegebiet Nord 2
87772 Pfaffenhausen
Germany

U-Value Calculation

Please select preferred window layout