Baza danych komponentów

English Deutsch polski 简体中文

System budowy
ECOCOCON Straw Panels

Identyfikator komponentu: 0867cs03
Producent: EcoCocon s.r.o.
Kategoria: Budownictwo 
Typ konstrukcji: Światło (słoma) 
Okno: The certification was done with the window smartwin solar I, which is a very slim phA-class window with triple 18 mm argon glazing, Swisspacer Ultimate spacer bar with PU secondary seal. In No. 01, the window is installed in the center of the wall. In No. 02, it is installed in flush with the exterior plaster. In No. 03, the windows are installed right at the inner edge, see certification report. 
Szczelność powietrzna: A diffusion open, but airtight membrane with sd <0,2m is wrapped on the outside of the straw during construction. This method is approved by both, hydrothermal simulation as well as in the field. The manufacturer provides additional information on his website. The membrane doubles as quick weather protection during construction. The membrane is taped to the airtight layer of the floor and roof. The membrane is later covered with wood fibre boards. It is pulled to the inside at the window openings; windows are then taped to the membrane. 
Ilustracja: The Passive House Institute has defined international component criteria for seven climate zones based on hygiene-, comfort- and affordability criteria. In principle, components which have been certified for climate zones with higher requirements may also be used in climates with less stringent requirements. This use might be reasonable from the economic point of view. 
Strefy klimatyczne: Cool, temperate
Uwaga: Modular Straw-Timber frame Construction. Thick-ness of straw panels is always 40cm. The straw is pressed homogenously at 110kg/m3 in a double wooden loadbearing timber frame 45x95mm. Top and bottom of the panels are covered with ply-wood. The flat, cut straw surface is visible inside and outside and when connecting the panels to each other. Clay plaster can be applied directly to the straw on the inside. The outside is covered with an airtight membrane (see below) and a wood fiber board. The wood fiber board can be plastered or a ventilated facade can be installed. The system is based on an external insulated floor slab.

Powrót do listy systemów budowlanych

Legal notice | Disclaimer | Privacy Policy