Baza danych komponentów

English Deutsch polski 简体中文

System budowy
smartshell timberframe E

Identyfikator komponentu: 0831cs03
Producent: pro Passivhausfenster GmbH
Kategoria: Budownictwo 
Typ konstrukcji: Światło (drewno) 
Opis okna systemu: The certification was done with the window smart-win solar i, which is a very slim phA-class window with triple 18 mm argon glazing, Swisspacer Ulti-mate spacer bar with PU secondary seal. A special feature of smatwin solar i is, that the reveal be-comes part of the windows frame. In No. 01, the window is installed at the outer wood-fibre board. In No. 02, it is installed deeper in the wall, see certification report. 
Opis szczelności powietrznej systemu: The airtightness layer in the walls is OSB board. The OSB boards are sealed together and to the windows with an air-tightness tape. The OSB board must be of sufficient air-tightness. An airtightness membrane is fitted to the ceiling with air-tightness tape at all junctions and connections. 
Explanatory Note: - 
Strefy klimatyczne: Cool, temperate
Uwaga: The construction system is built on a concrete floor slab supported completely with EPS insulation. The timber frame walls are constructed with studs at 60cm centres with OSB fixed on the inside and wood fibre board and breather membrane fixed to the outside. The service cavity is formed with 47x47mm battens with mineral insulation between and gypsum board on the room side. The rain-screen cladding is fixed on battens which are fixed through to the timber studs. The upper floors are formed with metal web joists with OSB deck and gypsum screed. The roof construction is formed with rafters at 60cm spacings with cellulose insula-tion between, breather membrane above with bat-tens and roof tiles. An air-tightness membrane is fitted below with cross battens and gypsum board over.
Certified since: 4 grudnia 2015

Powrót do listy systemów budowlanych

Legal notice | Disclaimer | Privacy Policy