Identyfikator komponentu: | 0623cw03 |
---|---|
Producent: | PONZIO POLSKA Sp. z o.o. |
Kategoria: | System ścian osłonowych |
Materiał: | Aluminium |
UW: | 0,80 W/(m2 K) |
Klasa efektywności: | phA |
Odstęp: | SWISSPACER Ultimate |
Strefy klimatyczne: | Cool, temperate |
Opis: | Aluminium mullion and transom facade. Covering- and pressure-strip from aluminium. Insulation of polytheylene inside of the rebate. Losses by screws and glass carrier were determined by 3d-thermal flux analysis (PHI). Used Pane: 50 mm (6/16/6/16/6), rebate depth: 14 mm. Used spacer: ULTIMATE Swisspacer. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
Certified since: | 16 maja 2014 |
Cięcie w ramie | Szerokość ramy bf mm |
Frame U-value Uf W/(m2 K) |
Glass edge Ψ-value Ψg W/(m K) |
Współczynnik temperatury fRsi = 0.25 m2K/W |
---|---|---|---|---|
Szpros stały | 52 | 0,93 | 0,034 | 0,80 |
Stała pawęż | 52 | 0,92 | 0,034 | 0,80 |
Dół stała | 52 | 0,92 | 0,034 | 0,80 |
Górna Ustalone | 52 | 0,92 | 0,034 | 0,80 |
Boczna stała | 52 | 0,93 | 0,034 | 0,80 |