Newly certified Manufacturers Certification criteria

No element found

0Products in the comparision list
Compare all


Certified since 16 октября 2014 г.
Climate zone Прохладный, умеренный
Window Type Curtain Wall System
Efficiency Class phA+
Material Aluminium
UW 0,80 W/(m2K)


Mullion and transom facade of aluminium. Aluminium cover- and pressure- strip. PE foam insulator inside of the rebate (0.035 W/(mK). Used Pane: 54 mm (6/18/6/18/6), intersection of the Glass: 14 mm. The screw-losses were carried out by 3D-thermal flux simulation (PHI), for the glass-carrier losses, the default-values according to the certification criteria were taken into account. Used spacer: ULTIMATE Swisspacer with silicone secondary sealing. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.

Имя Frame width U-Value Ψ-Value Frsi-Value
Mullion Fixed 50 mm 0,97 W/(m²K) 0,032 W/(mK) 0,830
Transom fixed 50 mm 0,94 W/(m²K) 0,032 W/(mK) 0,830
Bottom Fixed 50 mm 0,94 W/(m²K) 0,032 W/(mK) 0,830
Top fixed 50 mm 0,94 W/(m²K) 0,032 W/(mK) 0,830
Lateral fixed 50 mm 0,97 W/(m²K) 0,032 W/(mK) 0,830

Aluprof S.A.

Warszawska 153
43-300 Bielsko-Biała

U-Value Calculation

To Testers: this is not finished as of now

Please select preferred window layout