| Component id: | 0208ic03 |
|---|---|
| Manufacturer: | RAICO Bautechnik GmbH |
| Категория: | Glass Roof |
| Material: | Aluminium |
| UW: | 0,85 W/(m2 K) |
| Efficiency class: | phA |
| Spacer: | SWISSPACER V |
| Climate zones: | Прохладный, умеренный |
| Описание: | Aluminium construction, with aluminium system carrier. Covering- and pressure-strip from aluminium. PE-foam insulator in the glazing rebate (0.038 W/(mK)), cover by aluminium foil on the inside. Screw- and Glass carrier losses measured by ift Rosenheim. Used Pane: 48 mm (8/14/4/16/6), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Certified since: | 1 июня 2012 г. |
| Frame cut | Frame width bf mm |
Frame U-value Uf W/(m2 K) |
Glass edge Ψ-value Ψg W/(m K) |
Temperature factor fRsi = 0.25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 50 | 0,95 | 0,041 | 0,77 |
| Transom fixed | 50 | 1,05 | 0,041 | 0,77 |
| Transom 1 casement | 94 | 1,65 | 0,035 | 0,77 |
| Bottom Fixed | 50 | 1,05 | 0,040 | 0,77 |
| Top fixed | 50 | 1,05 | 0,040 | 0,77 |
| Lateral fixed | 50 | 0,95 | 0,041 | 0,77 |
Правовое уведомление | Заявление об отказе от ответственности | Политика конфиденциальности
