组件id: | 0538ic03 |
---|---|
制造商: | JET Brakel Aero GmbH |
种类: | 玻璃顶 |
材料: | 铝 |
UW: | 0.82 W/(m2 K) |
能效阶级: | phA |
空间: | SWISSPACER V |
气候区: | 冷,温度 |
描述: | Aluminium construction with covering- and pressure-strip from aluminium. PE-foam and styrodur insulator in the glazing rebate. Screws themallly seperated by ABS. Losses by screws and glass carrier were determined by 3D-thermal flux analysis (PHI). Used Pane: 52 mm (6/16/6/16/8), intersection of the Glass: 16 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
边宽缩减 | 边宽高度 bf/mm |
边框 U 值 Uf/(W/(m2 K)) |
Glass edge Ψ-value Ψg/(W/(m K)) |
温度因素 fRsi = 0,25 m2K/W |
---|---|---|---|---|
模型2装置 | 60 | 0.98 | 0.040 | 0.81 |
横梁装置 | 60 | 0.99 | 0.040 | 0.81 |
底部固定 | 60 | 0.99 | 0.039 | 0.81 |
顶部固定 | 60 | 0.99 | 0.039 | 0.81 |
侧面固定 | 60 | 0.98 | 0.040 | 0.81 |