Newly certified Κατασκευαστές Certification criteria

No element found

0Products in the comparision list
Compare all


Certified since 18/01/2010
Climate zone Ψυχρή, εύκρατη
Τύπος Curtain Wall System
Efficiency Class phA
Υλικό Timber / Aluminium
UW 0,80 W/(m2K)
Open type


Timber construction, Aluminium covering- and pressure-strip. PE-foam insulator in the glazing rebate (0.035 W/(mK)). Plastic glass-carier on stainless steel screws. Used Pane: 48 mm (6/16/4/16/6), intersection of the Glass: 13 mm. The thermal losses by the screws were carried out by using 3-D heat flux simulation by PHI, for the glass-carrier losses, the PHI-default value was taken into account. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.

Όνομα Frame width U-Value Ψ-Value Frsi-Value
Mullion Fixed 50 mm 0,92 W/(m²K) 0,035 W/(mK) 0,780
Transom fixed 50 mm 0,99 W/(m²K) 0,035 W/(mK) 0,780
Bottom Fixed 50 mm 0,99 W/(m²K) 0,035 W/(mK) 0,780
Top fixed 50 mm 0,99 W/(m²K) 0,035 W/(mK) 0,780
Lateral fixed 50 mm 0,92 W/(m²K) 0,035 W/(mK) 0,780

batimet GmbH

Enderstrasse 90
O1277 Dresden

U-Value Calculation

Please select preferred window layout