Timber construction, Aluminium covering- and pressure-strip. PE-foam insulator in the glazing rebate (0.035 W/(mK)). Plastic glass-carier on stainless steel screws. Used Pane: 48 mm (6/16/4/16/6), intersection of the Glass: 13 mm. The thermal losses by the screws were carried out by using 3-D heat flux simulation by PHI, for the glass-carrier losses, the PHI-default value was taken into account. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
|立柱固定||50 mm||0.92 W/(m²K)||0.035 W/(mK)||0.780|
|横梁固定||50 mm||0.99 W/(m²K)||0.035 W/(mK)||0.780|
|下横框固定||50 mm||0.99 W/(m²K)||0.035 W/(mK)||0.780|
|上横框固定||50 mm||0.99 W/(m²K)||0.035 W/(mK)||0.780|
|侧柱||50 mm||0.92 W/(m²K)||0.035 W/(mK)||0.780|