| Component id: | 0991cw03 |
|---|---|
| Manufacturer: | Forster Profilsysteme AG |
| Κατηγορία: | Curtain Wall System |
| Material: | Steel / Aluminium |
| UW: | 0,80 W/(m2 K) |
| Efficiency class: | phA |
| Spacer: | SWISSPACER Ultimate |
| Climate zones: | Ψυχρή, εύκρατη |
| Περιγραφή: | Steel facade with exterior aluminum cladding and internal screwing duct. Glass carrier and screw-losses determined by simulation (PHI). PE-foam rebate insulation (0,038 W/(mK)). Pane thickness: 56 mm (8/18/4/18/8), rebate depth: 14 mm, spacer: SWISSPACER Ultimate. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Certified since: | 22/10/2016 |
| Frame cut | Frame width bf mm |
Frame U-value Uf W/(m2 K) |
Glass edge Ψ-value Ψg W/(m K) |
Temperature factor fRsi = 0.25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 60 | 0,79 | 0,032 | 0,81 |
| Transom fixed | 60 | 0,79 | 0,032 | 0,81 |
| Transom 1 casement | 121 | 1,80 | 0,028 | 0,72 |
| Bottom Fixed | 60 | 0,79 | 0,031 | 0,81 |
| Top fixed | 60 | 0,79 | 0,031 | 0,81 |
| Lateral fixed | 60 | 0,79 | 0,031 | 0,81 |
Ανακοίνωση νομικού περιεχομένου | Αποποίηση ευθυνών | Πολιτική απορρήτου
