0991cw03 forster thermfix® vario Hi 60 mm: (窗帘墙系统): FB1
0991cw03 forster thermfix® vario Hi 60 mm: (窗帘墙系统): FB1
0991cw03 forster thermfix® vario Hi 60 mm: (窗帘墙系统): 0T1
0991cw03 forster thermfix® vario Hi 60 mm: (窗帘墙系统): 1T1
forster thermfix® vario Hi 60 mm
| Certified since | 2016年10月22日 |
| 气候区 | 冷,温度 |
| 种类 | 窗帘墙系统 |
| Sub type | |
| 能效阶级 | phA |
| 材料 | Steel / aluminium |
| UW | 0.80 W/(m2K) |
| 打开种类 |
描述
Steel facade with exterior aluminum cladding and internal screwing duct. Glass carrier and screw-losses determined by simulation (PHI). PE-foam rebate insulation (0,038 W/(mK)). Pane thickness: 56 mm (8/18/4/18/8), rebate depth: 14 mm, spacer: SWISSPACER Ultimate. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
| 名子 | 边宽高度 | U-value | Ψ-value | Frsi-value |
|---|---|---|---|---|
| 立柱固定 | 60 mm | 0.79 W/(m²K) | 0.032 W/(mK) | 0.810 |
| 横梁固定 | 60 mm | 0.79 W/(m²K) | 0.032 W/(mK) | 0.810 |
| 横梁1 | 121 mm | 1.80 W/(m²K) | 0.028 W/(mK) | 0.720 |
| 下横框固定 | 60 mm | 0.79 W/(m²K) | 0.031 W/(mK) | 0.810 |
| 上横框固定 | 60 mm | 0.79 W/(m²K) | 0.031 W/(mK) | 0.810 |
| 侧柱 | 60 mm | 0.79 W/(m²K) | 0.031 W/(mK) | 0.810 |
