Newly certified Κατασκευαστές Certification criteria

No element found

0Products in the comparision list
Compare all

THERM+ 56 S-i

Certified since 20/04/2010
Climate zone Ψυχρή, εύκρατη
Τύπος Curtain Wall System
Υπο-τύπος
Efficiency Class phA
Υλικό Steel / Aluminium
UW 0,80 W/(m2K)
Open type

Περιγραφή

Steel construction wit wedled system carrier. Aluminium covering- and pressure-strip. PE-foam insulator in the glazing rebate (0.038 W/(mK)). inside covered by reflecting Aluminium foil (ε = 0.05). Plastic glass-carier on stainless steel screws. The losses by the screws werde determined by measurement (ift), the losses caused by the glass carrier by 3D-simulation (PHI). Used Pane: 48 mm (6/16/4/16/6), intersection of the Glass: 12 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.

Όνομα Frame width U-Value Ψ-Value Frsi-Value
Mullion Fixed 56 mm 0,84 W/(m²K) 0,037 W/(mK) 0,810
Transom fixed 56 mm 0,83 W/(m²K) 0,036 W/(mK) 0,810
Bottom Fixed 56 mm 0,83 W/(m²K) 0,036 W/(mK) 0,810
Top fixed 56 mm 0,83 W/(m²K) 0,036 W/(mK) 0,810
Lateral fixed 56 mm 0,84 W/(m²K) 0,037 W/(mK) 0,810
0171cw03
PHPP 9
PHPP 10
English
Deutsch

RAICO Bautechnik GmbH

Gewerbegebiet Nord 2
87772 Pfaffenhausen
Germany

U-Value Calculation

Please select preferred window layout