Component Database

English Deutsch polski 简体中文


Curtain wall system
THERM+ 50 A-V


Component id: 0161cw03
Manufacturer: RAICO Bautechnik GmbH
Catégorie: Curtain Wall System
Material: Aluminium
UW: 0,80 W/(m2 K)
Efficiency class: phA
Spacer: SWISSPACER V
Climate zones: Frais, tempéré
Description: Aluminium construction, Aluminium covering- and pressure-strip. PE-foam insulator in the glazing rebate, inside covered by reflecting Aluminium foil ($\varepsilon$ = 0,05). Plastic glass-carier on stainless steel screws. The losses by the screws werde determined by measurement (ift), the losses caused by the glass carrier by 3D-simulation (PHI). Used Pane: 48 mm (6/16/4/16/6), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
Certified since: 20 avril 2010

Frame cut Frame width
bf
mm
Frame U-value
Uf
W/(m2 K)
Glass edge Ψ-value
Ψg
W/(m K)
Temperature factor
fRsi = 0.25 m2K/W
Mullion Fixed 50 0,87 0,038 0,82
Transom Fixed 50 0,86 0,038 0,82
Bottom Fixed 50 0,86 0,038 0,82
Top Fixed 50 0,86 0,038 0,82
Lateral Fixed 50 0,87 0,038 0,82

Coming soon

Back to list

Mentions légales | Clause de non-responsabilité | Politique de confidentialité