Newly certified Fabricantes Certification criteria

No element found

0Products in the comparision list
Compare all

THERM+ 50 A-V

Certified since 20 de abril de 2010
Climate zone Frío, templado
Tipo Curtain Wall System
Efficiency Class phA
Material Aluminio
UW 0,80 W/(m2K)
Open type

Descripción

Aluminium construction, Aluminium covering- and pressure-strip. PE-foam insulator in the glazing rebate, inside covered by reflecting Aluminium foil (ε = 0,05). Plastic glass-carier on stainless steel screws. The losses by the screws werde determined by measurement (ift), the losses caused by the glass carrier by 3D-simulation (PHI). Used Pane: 48 mm (6/16/4/16/6), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.

Nombre Frame width U-Value Ψ-Value Frsi-Value
Mullion Fixed 50 mm 0,87 W/(m²K) 0,038 W/(mK) 0,820
Transom fixed 50 mm 0,86 W/(m²K) 0,038 W/(mK) 0,820
Bottom Fixed 50 mm 0,86 W/(m²K) 0,038 W/(mK) 0,820
Top fixed 50 mm 0,86 W/(m²K) 0,038 W/(mK) 0,820
Lateral fixed 50 mm 0,87 W/(m²K) 0,038 W/(mK) 0,820
0161cw03
English
Deutsch

RAICO Bautechnik GmbH

Gewerbegebiet Nord 2
87772 Pfaffenhausen
Germany

U-Value Calculation

Please select preferred window layout