| Component id: | 0162cw03 |
|---|---|
| Manufacturer: | RAICO Bautechnik GmbH |
| Catégorie: | Curtain Wall System |
| Material: | Aluminium |
| UW: | 0,80 W/(m2 K) |
| Efficiency class: | phA |
| Spacer: | SWISSPACER V |
| Climate zones: | Frais, tempéré |
| Description: | Aluminium construction, Aluminium covering- and pressure-strip. PE-foam insulator in the glazing rebate, inside covered by reflecting Aluminium foil ($\varepsilon$ = 0.05). Plastic glass-carier on stainless steel screws. Used Pane: 48 mm (6/16/4/16/6), intersection of the Glass: 13 mm. Used spacer:Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Certified since: | 20 avril 2010 |
| Frame cut | Frame width bf mm |
Frame U-value Uf W/(m2 K) |
Glass edge Ψ-value Ψg W/(m K) |
Temperature factor fRsi = 0.25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 56 | 0,85 | 0,038 | 0,83 |
| Transom Fixed | 56 | 0,85 | 0,038 | 0,83 |
| Bottom Fixed | 56 | 0,85 | 0,038 | 0,83 |
| Top Fixed | 56 | 0,85 | 0,038 | 0,83 |
| Lateral Fixed | 56 | 0,85 | 0,038 | 0,83 |
Mentions légales | Clause de non-responsabilité | Politique de confidentialité