0211cw03 THERM+ 50 S-I (vertikal): (Curtain wall system): FB1
0211cw03 THERM+ 50 S-I (vertikal): (Curtain wall system): FB1
0211cw03 THERM+ 50 S-I (vertikal): (Curtain wall system): 1T1
THERM+ 50 S-I (vertikal)
| Certified since | 01 Luglio 2012 |
| Climate zone | Freddo, temperato |
| Tipo | Curtain wall system |
| Sub type | |
| Efficiency class | phA |
| Material | Steel / aluminium |
| UW | 0,80 W/(m2K) |
| Open type |
Descrizione
Steel construction, with steel system carrier. Covering- and pressure-strip from aluminium. PE-foam insulator in the glazing rebate (0.040 W/(mK)), cover by aluminium foil on the inside. The losses by the screws werde determined by measurement (ift), the losses caused by the glass carrier by 3D-simulation (PHI). Used Pane: 44 mm (4/16/4/16/4), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
| Nome | Frame width | U-value | Ψ-value | Frsi-value |
|---|---|---|---|---|
| Mullion Fixed | 50 mm | 0,93 W/(m²K) | 0,035 W/(mK) | 0,780 |
| Transom fixed | 50 mm | 0,93 W/(m²K) | 0,035 W/(mK) | 0,780 |
| Transom 1 casement | 150 mm | 1,32 W/(m²K) | 0,029 W/(mK) | 0,780 |
| Bottom Fixed | 50 mm | 0,93 W/(m²K) | 0,035 W/(mK) | 0,780 |
| Top fixed | 50 mm | 0,93 W/(m²K) | 0,035 W/(mK) | 0,780 |
| Lateral fixed | 50 mm | 0,93 W/(m²K) | 0,035 W/(mK) | 0,780 |
