THERM+ 50 S-I (vertikal)
| Certified since | July 1, 2012 |
| Climate zone | Cool, temperate |
| Type | Curtain Wall System |
| Efficiency Class | phA |
| Material | Steel / Aluminium |
| UW | 0.80 W/(m2K) |
Description
Steel construction, with steel system carrier. Covering- and pressure-strip from aluminium. PE-foam insulator in the glazing rebate (0.040 W/(mK)), cover by aluminium foil on the inside. The losses by the screws werde determined by measurement (ift), the losses caused by the glass carrier by 3D-simulation (PHI). Used Pane: 44 mm (4/16/4/16/4), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
| Name | Frame width | U-Value | Ψ-Value | Frsi-Value |
|---|---|---|---|---|
| Mullion Fixed | 50 mm | 0.93 W/(m²K) | 0.035 W/(mK) | 0.780 |
| Transom fixed | 50 mm | 0.93 W/(m²K) | 0.035 W/(mK) | 0.780 |
| Transom 1 casement | 150 mm | 1.32 W/(m²K) | 0.029 W/(mK) | 0.780 |
| Bottom Fixed | 50 mm | 0.93 W/(m²K) | 0.035 W/(mK) | 0.780 |
| Top fixed | 50 mm | 0.93 W/(m²K) | 0.035 W/(mK) | 0.780 |
| Lateral fixed | 50 mm | 0.93 W/(m²K) | 0.035 W/(mK) | 0.780 |
