Baza danych komponentów

English Deutsch polski 简体中文


System budowy
ETICS Capatect Classic / Longlife / Carbon

Identyfikator komponentu: 1354cs02
Producent: Caparol Polska Sp. z. o. o.
Kategoria: Budownictwo 
Typ konstrukcji: Solid (TICS) 
Okno: A typical baseline Passive House window (Uw ≈ 0.60 W/(m²K) mit Ug = 0.52 W/(m²K) is installed in the system with the aid of an exterior mounting system (e.g. ISO TOP Winframer "Type 3" from ISO-Chemie GmbH). The overall U-value of the installed window of standard size (1.23m wide, 1.48m tall) can be increased by a maximum of 0.05 W/(m²K), i.e. Uw, insalled ≤ 0.65 W/(m²K). 
Szczelność powietrzna: Airtightness of the system is achieved in the following way: windows and doors are installed with permanently elastic, sealing materials. The interior of external wall surfaces are plastered over the entire surface, down to the unfinished floor and up to the unfinished ceiling. The interior of external walls for lightweight construction are covered over the entire surface with continuous airtight membranes. Windows should be connected to the wall with suitable airtight connection membranes or profiles. 
Ilustracja: The Passive House Institute has defined international component criteria for seven climate zones based on hygiene-, comfort- and affordability criteria. In principle, components which have been certified for climate zones with higher requirements may also be used in climates with less stringent requirements. This use might make sense in certain circumstances. 
Strefy klimatyczne: Cold
Uwaga: With the "Capatect ETICS for Passive House Construction", the wintertime thermal insulation of buildings can be adjusted to the desired standard. "Capatect ETICS for Passive House Construction", in combination with a solid exterior wall, regulates humidity and temperature. This prevents overheating in summer if the planning principles according to PHPP are observed, and in winter heat is retained longer in the building. As investigated, the construction is deemed suitable for passive houses, as both the regular U-values of the exterior components are below 0.12 W/(m²K) and the connections meet the criteria of 'thermal bridge-free'. The surface temperatures of all connections (with the exception of window connections) meet the surface temperature requirements.

Powrót do listy systemów budowlanych

Legal notice | Disclaimer | Privacy Policy