smartwin in the Passive House Portal component database

smartwin

Certified since	April 18, 2016
Climate zone	Cool, temperate
Type	Window system
Sub type
Efficiency class	phA
Material	Timber / aluminium
`U`_W	0.77 W/(m²K)
Open type

Description

Aluminum cladded timber frame (Spruce/Fir, 0.11 W/(mK)), insulated by low dense timber-faser board (0,05 & 0,04 W/(mK)) & PU insulation (0,03 W/(mK)). Glazing: 4/18/4/18/4, Glass intersection: 15 mm Q100 = 0,11 m²/mh tested at a two-sash window with flying mullion (200 * 260 cm) Pane thickness: 48 mm (4/18/4/18/4), rebate depth: 15 mm, spacer: SWISSPACER Ultimate with polyurethane as secondary seal.

Name	Frame width	U-value	Ψ-value	Frsi-value
Mullion Fixed	110 mm	0.62 W/(m²K)	0.021 W/(mK)	0.740
Mullion Fixed	110 mm	0.78 W/(m²K)	0.020 W/(mK)	0.720
Transom fixed	110 mm	0.79 W/(m²K)	0.020 W/(mK)	0.710
Transom fixed	110 mm	0.79 W/(m²K)	0.020 W/(mK)	0.720
Mullion 1 casement	110 mm	0.73 W/(m²K)	0.021 W/(mK)	0.730
Mullion 1 casement	110 mm	0.92 W/(m²K)	0.020 W/(mK)	0.710
Transom 1 casement	110 mm	0.90 W/(m²K)	0.020 W/(mK)	0.710
Transom 1 casement	110 mm	0.90 W/(m²K)	0.020 W/(mK)	0.710
Mullion 2 casements	142 mm	0.71 W/(m²K)	0.021 W/(mK)	0.740
Mullion 2 casements	142 mm	0.92 W/(m²K)	0.020 W/(mK)	0.720
Transom 2 casements	142 mm	0.92 W/(m²K)	0.020 W/(mK)	0.710
Transom 2 casements	142 mm	0.95 W/(m²K)	0.020 W/(mK)	0.700
door side	142 mm	0.72 W/(m²K)	0.020 W/(mK)	0.730
Bottom Fixed	76 mm	0.72 W/(m²K)	0.020 W/(mK)	0.740
Top fixed	67 mm	0.53 W/(m²K)	0.021 W/(mK)	0.760
Lateral fixed	67 mm	0.53 W/(m²K)	0.021 W/(mK)	0.760
Flying Mullion	110 mm	0.73 W/(m²K)	0.020 W/(mK)	0.740
Flying Mullion	110 mm	0.90 W/(m²K)	0.020 W/(mK)	0.720
Bottom	76 mm	0.93 W/(m²K)	0.020 W/(mK)	0.720
Top	67 mm	0.71 W/(m²K)	0.021 W/(mK)	0.750
Lateral	67 mm	0.71 W/(m²K)	0.021 W/(mK)	0.750
Threshold	76 mm	0.97 W/(m²K)	0.020 W/(mK)	0.720

Installation situation
I want to use my own installation values
Ψ_up= W/(mK) Ψ_down= W/(mK)	Ψ_left= W/(mK) Ψ_right= W/(mK)
Or select certified situation:	`U`_{W, installed} = ? W/(m² K)

U-value calculation
	`b₁`  m	`b₂`  m	`b₃`  m
`h_top`  m `h_bottom`  m				Glazing `U`_g  W/(m² K) G-value
	`U`_W = ? W/(m² K)

Cost calculation
Orientation:	Please choose orientation of the window to get the PHPP-standard values for solar radiation
Degree days: kKh/a Solar radiation: kWh/(m²a)	Reduction factor of solar yield: Shading factor:	Recommended value for reduction factor is 0.9 Shading factor should be between 0.1 and 1. For standard situations see ISO EN 13790
Energy price €/kWh	Real interest rate %	Lifetime Years
Purchase price: €
	Present value (energy) = ? € Present value (total) = ? €

smartwin

smartwin

Description

U-value calculation

Please select preferred window layout

Installation situation

U-value calculation

Cost calculation