| Component id: | 0724cw03 |
|---|---|
| Manufacturer: | Kawneer |
| Category: | Curtain Wall System |
| Material: | Aluminium |
| UW: | 0.79 W/(m2 K) |
| Efficiency class: | phA+ |
| Spacer: | SWISSPACER V |
| Climate zones: | Cool, temperate |
| Description: | Aluminium mullion and transom facade, cover- and pressure- strip of aluminium. PE-insulator ($\lambda$ = 0.038 W/(mK) inside of the rebate. The losses by the screws habe been determined by measurement, the losses caused by the glass carrier by 3D-simulation (PHI). Used Pane: 54 mm (6/18/6/18/6), intersection of the Glass: 14 mm. Used spacer: Swissspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Certified since: | Oct. 9, 2014 |
| Frame cut | Frame width bf mm |
Frame U-value Uf W/(m2 K) |
Glass edge Ψ-value Ψg W/(m K) |
Temperature factor fRsi = 0.25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 50 | 0.82 | 0.032 | 0.81 |
| Transom fixed | 50 | 0.82 | 0.032 | 0.81 |
| Bottom Fixed | 50 | 0.82 | 0.032 | 0.81 |
| Top fixed | 50 | 0.82 | 0.032 | 0.81 |
| Lateral fixed | 50 | 0.82 | 0.032 | 0.81 |