| Component id: | 1022cw03 |
|---|---|
| Manufacturer: | RAICO Bautechnik GmbH |
| Category: | Curtain Wall System |
| Material: | Steel / Aluminium |
| UW: | 0.79 W/(m2 K) |
| Efficiency class: | phA+ |
| Spacer: | SWISSPACER Ultimate |
| Climate zones: | Cool, temperate |
| Description: | Construction: Steel aluminum curtain wall with insulation inside the glazing rebate (0.038 W/(mK)) with aluminium foil applied on the inside. Pane thickness: 44 mm (4/16/4/16/4), rebate depth: 13 mm, spacer: SWISSPACER Ultimate. Different versions of pressureplate, coverstrip and insulating material are available and have been evaluated. These values can be provided by the system provider and the PHI on request. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Frame cut | Frame width bf/mm |
Frame U value Uf/(W/(m2 K)) |
Glass edge Ψ-value Ψg/(W/(m K)) |
Temperature factor fRsi = 0,25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 50 | 0.90 | 0.031 | 0.78 |
| Transom Fixed | 50 | 0.93 | 0.030 | 0.78 |
| Transom 1 casement | 90 | 1.07 | 0.028 | 0.68 |
| Bottom Fixed | 50 | 0.78 | 0.030 | 0.78 |
| Top Fixed | 50 | 0.78 | 0.030 | 0.78 |
| Lateral Fixed | 50 | 0.78 | 0.030 | 0.78 |
