ENERsign primus in the Passive House Portal component database

1194ws02 ENERsign primus: (Window system)

ENERsign primus

Certified since	March 6, 2018
Climate zone	Cold
Type	Window system
Sub type
Efficiency class	phA
Material	Timber / aluminium
`U`_W	0.60 W/(m²K)
Open type

Description

Aluminium cladded timber frame (0,11 W/(mK)), insulated by ENERcell (0,06 W/(mK)) and EPS-Foam (0,032 W/(mK)). Q100 = 0,16 m³/(hm) testet at a window with flying mullion Stulpfenster (2,26 * 2,51 m). Pane thickness: 48 mm (4/18/4/18/4), rebate depth: 15 mm, spacer: SWISSPACER Ultimate with polyurethane as secondary seal. At the side-section with handle the temperature factor for the cold climate is not achieved. Never the less, this values are much better than usual.

At the side-section with handle the temperature factor for the cold climate is not achieved. Never the less, this values are much better than usual.

Name	Frame width	U-value	Ψ-value	Frsi-value
Mullion Fixed	120 mm	0.58 W/(m²K)	0.019 W/(mK)	0.782
Transom fixed	120 mm	0.61 W/(m²K)	0.019 W/(mK)	0.777
Mullion 1 casement	120 mm	0.63 W/(m²K)	0.020 W/(mK)	0.771
Transom 1 casement	120 mm	0.66 W/(m²K)	0.020 W/(mK)	0.769
Corner	342 mm	0.31 W/(m²K)	0.019 W/(mK)	0.750
Door side	171 mm	0.70 W/(m²K)	0.022 W/(mK)	0.739
Bottom Fixed	100 mm	0.61 W/(m²K)	0.019 W/(mK)	0.776
Top fixed	100 mm	0.58 W/(m²K)	0.019 W/(mK)	0.781
Jamb fixed	100 mm	0.58 W/(m²K)	0.019 W/(mK)	0.781
Flying Mullion	100 mm	0.65 W/(m²K)	0.020 W/(mK)	0.770
Bottom	100 mm	0.64 W/(m²K)	0.020 W/(mK)	0.769
Head	100 mm	0.64 W/(m²K)	0.020 W/(mK)	0.769
Jamb	100 mm	0.64 W/(m²K)	0.020 W/(mK)	0.769
Threshold	100 mm	1.09 W/(m²K)	0.022 W/(mK)	0.714

Installation situation
I want to use my own installation values
Ψ_up= W/(mK) Ψ_down= W/(mK)	Ψ_left= W/(mK) Ψ_right= W/(mK)
Or select certified situation:	`U`_{W, installed} = ? W/(m² K)

U-value calculation
	`b₁`  m	`b₂`  m	`b₃`  m
`h_top`  m `h_bottom`  m				Glazing `U`_g  W/(m² K) g-value
	`U`_W = ? W/(m² K)

Cost calculation
Orientation:	Please choose orientation of the window to get the PHPP-standard values for solar radiation
Degree days: kKh/a Solar radiation: kWh/(m²a)	Reduction factor of solar yield: Shading factor:	Recommended value for reduction factor is 0.9 Shading factor should be between 0.1 and 1. For standard situations see ISO EN 13790
Energy price €/kWh	Real interest rate %	Lifetime Years
Purchase price: €
	Present value (energy) = ? € Present value (total) = ? €

ENERsign primus

ENERsign primus

Description

U-value calculation

Please select preferred window layout

Installation situation

U-value calculation

Cost calculation