| Component id: | 0725cw03 |
|---|---|
| Manufacturer: | Aluprof S.A. |
| Catégorie: | Curtain Wall System |
| Material: | Aluminium |
| UW: | 0,78 W/(m2 K) |
| Efficiency class: | phA+ |
| Spacer: | SWISSPACER Ultimate |
| Climate zones: | Frais, tempéré |
| Description: | Mullion and transom facade of aluminium. Aluminium cover- and pressure- strip. PE foam insulator inside of the rebate (0.035 W/(mK). Used Pane: 53 mm (6/18/5/18/6), intersection of the Glass: 15 mm. The screw-losses were carried out by 3D-thermal flux simulation (PHI), for the glass-carrier losses, the default-values according to the certification criteria were taken into account. Used spacer: ULTIMATE Swisspacer with silicone secondary sealing. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Certified since: | 16 octobre 2014 |
| Frame cut | Frame width bf mm |
Frame U-value Uf W/(m2 K) |
Glass edge Ψ-value Ψg W/(m K) |
Temperature factor fRsi = 0.25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 50 | 0,84 | 0,030 | 0,82 |
| Transom fixed | 50 | 0,86 | 0,030 | 0,82 |
| Bottom Fixed | 50 | 0,86 | 0,030 | 0,82 |
| Top fixed | 50 | 0,86 | 0,030 | 0,82 |
| Lateral fixed | 50 | 0,84 | 0,030 | 0,82 |
Mentions légales | Clause de non-responsabilité | Politique de confidentialité