| Component id: | 0210ic03 |
|---|---|
| Manufacturer: | RAICO Bautechnik GmbH |
| Catégorie: | Glass Roof |
| Material: | Timber / Aluminium |
| UW: | 0,84 W/(m2 K) |
| Efficiency class: | phA |
| Spacer: | SWISSPACER V |
| Climate zones: | Frais, tempéré |
| Description: | Timber construction, with aluminium system carrier. Covering- and pressure-strip from aluminium. PE-foam insulator in the glazing rebate (0.038 W/(mK)), covered by aluminium foil on the inside. Screw- and Glass carrier losses measured by ift Rosenheim. Used Pane: 44 mm (8/12/4/14/6), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Certified since: | 1 juin 2012 |
| Frame cut | Frame width bf mm |
Frame U-value Uf W/(m2 K) |
Glass edge Ψ-value Ψg W/(m K) |
Temperature factor fRsi = 0.25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 50 | 0,89 | 0,040 | 0,73 |
| Transom fixed | 50 | 1,02 | 0,040 | 0,73 |
| Transom 1 casement | 94 | 1,65 | 0,035 | 0,73 |
| Bottom Fixed | 50 | 1,02 | 0,040 | 0,73 |
| Top fixed | 50 | 1,02 | 0,040 | 0,73 |
| Lateral fixed | 50 | 0,89 | 0,040 | 0,73 |
Mentions légales | Clause de non-responsabilité | Politique de confidentialité
