THERM+ 50 H-I (schräg)
Timber construction, with aluminium system carrier. Covering- and pressure-strip from aluminium. PE-foam insulator in the glazing rebate (0.038 W/(mK)), covered by aluminium foil on the inside. Screw- and Glass carrier losses measured by ift Rosenheim. Used Pane: 44 mm (8/12/4/14/6), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
|立柱固定||50 mm||0.89 W/(m²K)||0.040 W/(mK)||0.730|
|横梁固定||50 mm||1.02 W/(m²K)||0.040 W/(mK)||0.730|
|横梁1||94 mm||1.65 W/(m²K)||0.035 W/(mK)||0.730|
|下横框固定||50 mm||1.02 W/(m²K)||0.040 W/(mK)||0.730|
|上横框固定||50 mm||1.02 W/(m²K)||0.040 W/(mK)||0.730|
|侧柱||50 mm||0.89 W/(m²K)||0.040 W/(mK)||0.730|