Newly certified Manufacturers Certification criteria

No element found

THERM+ 50 H-I (schräg)

0Products in the comparision list
Compare all

THERM+ 50 H-I (schräg)

Certified since June 1, 2012
Climate zone Cool, temperate
Window Type Glass Roof
Efficiency Class phA
Material Timber / Aluminium
UW 0.84 W/(m2K)


Timber construction, with aluminium system carrier. Covering- and pressure-strip from aluminium. PE-foam insulator in the glazing rebate (0.038 W/(mK)), covered by aluminium foil on the inside. Screw- and Glass carrier losses measured by ift Rosenheim. Used Pane: 44 mm (8/12/4/14/6), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.

Name Frame width U-Value Ψ-Value Frsi-Value
Mullion Fixed 50 mm 0.89 W/(m²K) 0.040 W/(mK) 0.730
Transom fixed 50 mm 1.02 W/(m²K) 0.040 W/(mK) 0.730
Transom 1 casement 94 mm 1.65 W/(m²K) 0.035 W/(mK) 0.730
Bottom Fixed 50 mm 1.02 W/(m²K) 0.040 W/(mK) 0.730
Top fixed 50 mm 1.02 W/(m²K) 0.040 W/(mK) 0.730
Lateral fixed 50 mm 0.89 W/(m²K) 0.040 W/(mK) 0.730
Gewerbegebiet Nord 2
87772 Pfaffenhausen

U-Value Calculation

To Testers: this is not finished as of now

Please select preferred window layout