Baza danych komponentów

English Deutsch polski 简体中文

System budowy

Identyfikator komponentu: 1720cs03
Producent: Advanced Housing Systems Ltd.
Kategoria: Budownictwo 
Typ konstrukcji: Światło (drewno) 
Okno: Installation type 1 refers to the E98 Passive entrance door from Urban Front Ltd., in a fully opaque configuration; the Ud-installed value shown is based on a reference size of 1,1 by 2,2 m. Type 2 refers to the Ultra Insulated outward-opening window from Green Building Store, using a Ug-value of 0,70 W/(m²K) and based on a reference size of 1,23 by 1,48 m. Type 3 refers to the Primus Slide double sliding door from ENERsign GmbH. For the latter, the average frame values are shown and the mullion is excluded, but the actual installed Uw-value is shown. This is based on a reference size of 2,4 by 2,5 m and uses a Ug-value of 0,70 W/(m²K). 
Szczelność powietrzna: The Passive House level of airtightness is achieved by way of suitable membrane (SIGA Majrex 200), with joints sealed using appropriate airtightness tape. Windows and doors are installed using flexible gaskets and are connected to the airtight membrane using airtightness tape. Service penetrations are to be sealed using suitable gaskets or tape. 
Ilustracja: THEPASSIVHAUS is a construction system comprising a lightweight timber assembly for above-ground application and insulated concrete formwork for basement construction. The timber assembly is insulated using Knauf glass wool products (Knauf Frametherm Roll/Slab, λR 0,038 W/(mK); Knauf Earthwool Omnifit Roll 0,048 W/(mK)). The ICF assembly is insulated using EPS products (Kay-Cel EPS 200E, λR 0,041 W/(mK); Kay-Cel EPS 250/300E, λR 0,040 W/(mK). The system was simulated in one-, two- and three-dimensions in accordance with ISO 6946 and ISO 10211, the results are shown below and right. A hygrothermal assessment was carried out using the simplified Glaser method in line with ISO 13788 for all wall, roof and floor types; in accordance with the Passive House criteria, no risk of moisture accumulation or interstitial condensation was found. 
Strefy klimatyczne: Cool, temperate

Powrót do listy systemów budowlanych

Legal notice | Disclaimer | Privacy Policy