0167cw03 THERM+ 56 H-i: (窗帘墙系统): FB1
THERM+ 56 H-i
| Certified since | 2010年4月20日 |
| 气候区 | 冷,温度 |
| 种类 | 窗帘墙系统 |
| Sub type | |
| 能效阶级 | phA |
| 材料 | Timber / aluminium |
| UW | 0.80 W/(m2K) |
| 打开种类 |
描述
Timber construction, Aluminium covering- and pressure-strip. PE-foam insulator in the glazing rebate. Plastic glass-carier on stainless steel screws. The losses by the screws werde determined by measurement (ift), the losses caused by the glass carrier by 3D-simulation (PHI). Used Pane: 44 mm (4/16/4/16/4), intersection of the Glass: 13. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
| 名子 | 边宽高度 | U-value | Ψ-value | Frsi-value |
|---|---|---|---|---|
| 立柱固定 | 56 mm | 0.91 W/(m²K) | 0.034 W/(mK) | 0.790 |
| 横梁固定 | 56 mm | 0.91 W/(m²K) | 0.034 W/(mK) | 0.790 |
| 下横框固定 | 56 mm | 0.91 W/(m²K) | 0.034 W/(mK) | 0.790 |
| 上横框固定 | 56 mm | 0.91 W/(m²K) | 0.034 W/(mK) | 0.790 |
| 侧柱 | 56 mm | 0.91 W/(m²K) | 0.034 W/(mK) | 0.790 |
Legend
制造商
House in which this component is used
Vendor known for reselling this component
制造商
House in which this component is used
Vendor known for reselling this component
Leaflet © OpenStreetMap contributors
