Newly certified 制造商 Certification criteria

No element found

THERM+ 50 A-I (schräg)

0Products in the comparision list
Compare all

THERM+ 50 A-I (schräg)

Certified since 2012年6月1日
气候区 冷,温度
类型 玻璃顶
能效阶级 phA
材料
UW 0.85 W/(m2K)
打开种类

描述

Aluminium construction, with aluminium system carrier. Covering- and pressure-strip from aluminium. PE-foam insulator in the glazing rebate (0.038 W/(mK)), cover by aluminium foil on the inside. Screw- and Glass carrier losses measured by ift Rosenheim. Used Pane: 48 mm (8/14/4/16/6), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.

名称 边宽高度 U值 Ψ-Value Frsi-Value
立柱固定 50 mm 0.95 W/(m²K) 0.041 W/(mK) 0.770
横梁固定 50 mm 1.05 W/(m²K) 0.041 W/(mK) 0.770
横梁1 94 mm 1.65 W/(m²K) 0.035 W/(mK) 0.770
下横框固定 50 mm 1.05 W/(m²K) 0.040 W/(mK) 0.770
上横框固定 50 mm 1.05 W/(m²K) 0.040 W/(mK) 0.770
侧柱 50 mm 0.95 W/(m²K) 0.041 W/(mK) 0.770
0208ic03
English
Deutsch
Gewerbegebiet Nord 2
87772 Pfaffenhausen
Germany

U值计算

Please select preferred window layout