0210ic03 THERM+ 50 H-I (schräg): (Glass roof): 1T1
0210ic03 THERM+ 50 H-I (schräg): (Glass roof): FB1
THERM+ 50 H-I (schräg)
| Certified since | 01 Юни 2012 |
| Climate zone | Cool, temperate |
| Type | Glass roof |
| Sub type | |
| Efficiency class | phA |
| Material | Timber / aluminium |
| UW | 0.84 W/(m2K) |
| Open type |
Description
Timber construction, with aluminium system carrier. Covering- and pressure-strip from aluminium. PE-foam insulator in the glazing rebate (0.038 W/(mK)), covered by aluminium foil on the inside. Screw- and Glass carrier losses measured by ift Rosenheim. Used Pane: 44 mm (8/12/4/14/6), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
| Name | Frame width | U-value | Ψ-value | Frsi-value |
|---|---|---|---|---|
| Mullion Fixed | 50 mm | 0,89 W/(m²K) | 0,040 W/(mK) | 0,730 |
| Transom fixed | 50 mm | 1,02 W/(m²K) | 0,040 W/(mK) | 0,730 |
| Transom 1 casement | 94 mm | 1,65 W/(m²K) | 0,035 W/(mK) | 0,730 |
| Bottom Fixed | 50 mm | 1,02 W/(m²K) | 0,040 W/(mK) | 0,730 |
| Top fixed | 50 mm | 1,02 W/(m²K) | 0,040 W/(mK) | 0,730 |
| Lateral fixed | 50 mm | 0,89 W/(m²K) | 0,040 W/(mK) | 0,730 |
