Newly certified Κατασκευαστές Certification criteria

No element found

0Products in the comparision list
Compare all

THERM+ 50 S-I (schräg)

Certified since 01/06/2012
Climate zone Ψυχρή, εύκρατη
Τύπος Glass Roof
Υπο-τύπος
Efficiency Class phA
Υλικό Steel / Aluminium
UW 0,84 W/(m2K)
Open type

Περιγραφή

Steel construction, with steel system carrier. Covering- and pressure-strip from aluminium. PE-foam insulator in the glazing rebate (0.038 W/(mK)), covered by aluminium foil on the inside. Screw- and Glass carrier losses measured by ift Rosenheim. Used Pane: 48 mm (8/14/4/16/6), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.

Όνομα Frame width U-Value Ψ-Value Frsi-Value
Mullion Fixed 50 mm 0,87 W/(m²K) 0,039 W/(mK) 0,770
Transom fixed 50 mm 0,95 W/(m²K) 0,039 W/(mK) 0,770
Transom 1 casement 94 mm 1,65 W/(m²K) 0,035 W/(mK) 0,770
Bottom Fixed 50 mm 0,95 W/(m²K) 0,038 W/(mK) 0,770
Top fixed 50 mm 0,95 W/(m²K) 0,038 W/(mK) 0,770
Lateral fixed 50 mm 0,87 W/(m²K) 0,039 W/(mK) 0,770
0209ic03
PHPP 9
PHPP 10
English
Deutsch

RAICO Bautechnik GmbH

Gewerbegebiet Nord 2
87772 Pfaffenhausen
Germany

U-Value Calculation

Please select preferred window layout