| Component id: | 0159ic03 |
|---|---|
| Manufacturer: | LAMILUX Heinrich Strunz GmbH |
| Category: | Glass Roof |
| Material: | Aluminium |
| UW: | 0.81 W/(m2 K) |
| Efficiency class: | phA |
| Spacer: | Super Spacer TriSeal / T-Spacer Premium |
| Climate zones: | Cool, temperate |
| Description: | Aluminium construction, Aluminium pressure-strip. PE-foam insulator in the glazing rebate, plastic glass-carrier on stainless steel bolts. The losses by the screws werde determined by measurement (ift), the losses caused by the glass carrier by 3D-simulation (PHI). Used Pane: 52 mm (6/16/6/16/8), intersection of the Glass: 16 mm. Used spacer: SuperSp. TriSeal PU. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Certified since: | Aug. 11, 2011 |
| Frame cut | Frame width bf mm |
Frame U-value Uf W/(m2 K) |
Glass edge Ψ-value Ψg W/(m K) |
Temperature factor fRsi = 0.25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 60 | 0.79 | 0.034 | 0.79 |
| Transom fixed | 60 | 0.79 | 0.034 | 0.79 |
| Bottom Fixed | 60 | 0.79 | 0.034 | 0.79 |
| Top fixed | 60 | 0.79 | 0.034 | 0.79 |
| Lateral fixed | 60 | 0.79 | 0.034 | 0.79 |