LAMILUX Glasdach PR60 Passivhaus (Dach)
Aluminium construction, Aluminium pressure-strip. PE-foam insulator in the glazing rebate, plastic glass-carrier on stainless steel bolts. The losses by the screws werde determined by measurement (ift), the losses caused by the glass carrier by 3D-simulation (PHI). Used Pane: 52 mm (6/16/6/16/8), intersection of the Glass: 16 mm. Used spacer: SuperSp. TriSeal PU. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
|立柱固定||60 mm||0.79 W/(m²K)||0.034 W/(mK)||0.790|
|横梁固定||60 mm||0.79 W/(m²K)||0.034 W/(mK)||0.790|
|下横框固定||60 mm||0.79 W/(m²K)||0.034 W/(mK)||0.790|
|上横框固定||60 mm||0.79 W/(m²K)||0.034 W/(mK)||0.790|
|侧柱||60 mm||0.79 W/(m²K)||0.034 W/(mK)||0.790|