| Component id: | 0739cw03 |
|---|---|
| Fabricante: | SCHÜCO International KG |
| Categoría: | Curtain Wall System |
| Material: | Aluminio |
| UW: | 0,80 W/(m2 K) |
| Efficiency class: | phA |
| Spacer: | SWISSPACER Ultimate |
| Climate zones: | Frío, templado |
| Descripción: | Aluminum curtain wall, insulated by PE-foam (0.038 W/(mK)) and PET-foam (0.035 W/(mK)). Reduction of the radiation losses by low emmissivity tape. Pane thickness: 46 mm (6/16/4/16/4), rebate depth: 13 mm, spacer: SWISSPACER Ultimate. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Certified since: | 19 de enero de 2015 |
| Frame cut | Frame width bf mm |
Frame U-value Uf W/(m2 K) |
Glass edge Ψ-value Ψg W/(m K) |
Temperature factor fRsi = 0.25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 50 | 0,88 | 0,034 | 0,79 |
| Transom fixed | 50 | 0,88 | 0,035 | 0,79 |
| Transom 1 casement | 156 | 1,20 | 0,031 | 0,79 |
| Bottom Fixed | 50 | 0,88 | 0,035 | 0,79 |
| Top fixed | 50 | 0,88 | 0,035 | 0,79 |
| Lateral fixed | 50 | 0,88 | 0,034 | 0,79 |
Aviso legal Descargo de responsabilidad | Política de privacidad
