Construction systems

Ventilation systems

Façades

Windows

Doors

Drain water heat recovery

Heatpumps and combined systems

Air tightness systems

Sun protection Systems

Other

S77 Passive

Info U-Value Calculation

Compare all

S77 Passive

Certified since	24 de noviembre de 2017
Climate zone	Cálido, templado
Tipo	Operable
Sub Type
Efficiency Class	phC
Material	Aluminio
`U`_W	1,00 W/(m²K)
Open type	Inward opening

Descripción

Thermally separated aluminium frame with low thermal conductivity polyamide (25% glass fibre) and KOOLTHERM Q3 insulation bars (0,021 W/(mK)), Polyethylene rebate insulation foam (0,05 W/(mK)). Pane thickness: 48 mm (4/18/4/18/4), rebate depth: 18mm, spacer: SWISSPACER Ultimate with polysulfide secondary seal.

Nombre	Frame width	U-Value	Ψ-Value	Frsi-Value
Flying Mullion	161 mm	1,00 W/(m²K)	0,025 W/(mK)	0,730
Bottom	136 mm	1,02 W/(m²K)	0,024 W/(mK)	0,740
Top	136 mm	1,02 W/(m²K)	0,024 W/(mK)	0,740
Lateral	136 mm	1,02 W/(m²K)	0,024 W/(mK)	0,740

Component-ID

1149wi04

Export

Certificado

Fabricante de componentes

Alumil S.A.

Dirección

8 Iatrou Gogousi
54629 Efkarpia Thessaloniki
Greece

Telephone

+302313011000

El correo electrónico no pudo ser enviado

f.domazinakis@alumil.com

Sitio web

http://www.alumil.com

U-Value Calculation

Please select preferred window layout

Here you will find Passive House components for your projects!:

We're here to support you in your search for suitable Passive House components. Simply select the location where the product is to be used. The Passive House Portal then helps lists the certified components that are available for this climate zone

You can adjust the location selection at any time by clicking the map pin icon at the top in the menu bar

Installation situation
I want to use my own installation values
Ψ_up= W/(mK) Ψ_down= W/(mK)	Ψ_left= W/(mK) Ψ_right= W/(mK)
Or select certified situation:	`U`_{W, installed} = ? W/(m² K)

U-value calculation
	`b₁`  m	`b₂`  m	`b₃`  m
`h_top`  m `h_bottom`  m				Glazing `U`_g  W/(m² K) G-value
	`U`_W = ? W/(m² K)

Cost calculation
Orientation:	Please choose orientation of the window to get the PHPP-standard values for solar radiation
Degree days: kKh/a Solar radiation: kWh/(m²a)	Reduction factor of solar yield: Shading factor:	Recommended value for reduction factor is 0.9 Shading factor should be between 0.1 and 1. For standard situations see ISO EN 13790
Energy price €/kWh	Real interest rate %	Lifetime Years
Purchase price: €
	Present value (energy) = ? € Present value (total) = ? €

S77 Passive

S77 Passive

Descripción

U-Value Calculation

Please select preferred window layout

Installation situation

U-value calculation

Cost calculation