Newly certified Fabricants Certification criteria

No element found

0Products in the comparision list
Compare all

PROCURAL PF152HI

Certified since 16 mai 2014
Climate zone Frais, tempéré
Type Curtain Wall System
Sub Type
Classe d'efficacité phA
Material Aluminium
UW 0,80 W/(m2K)
Open type

Description

Aluminium mullion and transom facade. Covering- and pressure-strip from aluminium. Insulation of polytheylene inside of the rebate. Losses by screws and glass carrier were determined by 3d-thermal flux analysis (PHI). Used Pane: 50 mm (6/16/6/16/6), rebate depth: 14 mm. Used spacer: ULTIMATE Swisspacer. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.

Nom Frame width U-Value Ψ-Value Frsi-Value
Mullion Fixed 52 mm 0,93 W/(m²K) 0,034 W/(mK) 0,800
Transom fixed 52 mm 0,92 W/(m²K) 0,034 W/(mK) 0,800
Bottom Fixed 52 mm 0,92 W/(m²K) 0,034 W/(mK) 0,800
Top fixed 52 mm 0,92 W/(m²K) 0,034 W/(mK) 0,800
Lateral fixed 52 mm 0,93 W/(m²K) 0,034 W/(mK) 0,800
0623cw03
PHPP 9
PHPP 10
English
Deutsch

PROCURAL Sp. z o.o.

Cekanowo u. Plocka 22
09-472 Slupno
Poland

U-Value Calculation

Please select preferred window layout