Newly certified Fabricants Certification criteria

No element found

BA5/6 PH, Glasdach

0Products in the comparision list
Compare all

BA5/6 PH, Glasdach

Certified since 18 juillet 2013
Climate zone Frais, tempéré
Type Glass Roof
Classe d'efficacité phA
Material Aluminium
UW 0,82 W/(m2K)
Open type

Description

Aluminium construction with covering- and pressure-strip from aluminium. PE-foam and styrodur insulator in the glazing rebate. Screws themallly seperated by ABS. Losses by screws and glass carrier were determined by 3D-thermal flux analysis (PHI). Used Pane: 52 mm (6/16/6/16/8), intersection of the Glass: 16 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.

Nom Frame width U-Value Ψ-Value Frsi-Value
Mullion Fixed 60 mm 0,98 W/(m²K) 0,040 W/(mK) 0,810
Transom fixed 60 mm 0,99 W/(m²K) 0,040 W/(mK) 0,810
Bottom Fixed 60 mm 0,99 W/(m²K) 0,039 W/(mK) 0,810
Top fixed 60 mm 0,99 W/(m²K) 0,039 W/(mK) 0,810
Lateral fixed 60 mm 0,98 W/(m²K) 0,040 W/(mK) 0,810
0538ic03
English
Deutsch

VELUX A/S

Ådalsvej 99
2970 Hørsholm
Denmark

U-Value Calculation

Please select preferred window layout